User Tools

Site Tools


implementation:wms:directcyclec

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

implementation:wms:directcyclec [2017/06/12 12:10]
csuhaa created
implementation:wms:directcyclec [2018/06/29 12:58] (current)
csuhaa 18.2
Line 1: Line 1:
-===== 10.2. Direct Cycle Count===== +====== 10.2. Direct Cycle Count====== 
-{{ :​implementation:​functionalguide:​cycle_count:​dcc_flowchart.png |}}+{{map> ​:​implementation:​wms:​cycle_count:​dcc_flowchart.png |}} 
 +  * [[implementation:​wms:​directcyclec#​count_location|Count location @ 85,​150,​180,​170]] 
 +  * [[implementation:​wms:​directcyclec#​identify_location|Identify location ​ @ 85,​182,​180,​237]] 
 +  * [[implementation:​wms:​directcyclec#​scan_sscc|Scan SSCC  @ 85,​277,​180,​332]] 
 +  * [[implementation:​wms:​directcyclec#​identify_product|Identify product @ 85,​370,​180,​425]] 
 +  * [[implementation:​wms:​directcyclec#​enter_batch_data|Enter batch data @ 85,​465,​180,​520]] 
 +  * [[implementation:​wms:​directcyclec#​add_quantity|Add quantity @ 85,​560,​180,​615]] 
 +  * [[implementation:​wms:​directcyclec#​adjust_logistic_unit|Adjust logistic unit @ 260,​150,​360,​170]] 
 +  * [[implementation:​wms:​directcyclec#​scan_sscc1|Scan SSCC  @ 265,​182,​360,​237]] 
 +  * [[implementation:​wms:​directcyclec#​select_item|Select item  @ 265,​277,​360,​332]] 
 +  * [[implementation:​wms:​directcyclec#​adjust_quantity|Adjust quantity @ 265,​370,​360,​425]] 
 + 
 +  * [[implementation:​wms:​directcyclec#​count_items_on_location|Count items on location @ 400,​150,​540,​170]] 
 +  * [[implementation:​wms:​directcyclec#​identify_location1|Identify location ​ @ 425,​182,​520,​237]] 
 +  * [[implementation:​wms:​directcyclec#​identify_product1|Identify product @ 425,​277,​520,​332]] 
 +  * [[implementation:​wms:​directcyclec#​scan_sscc1|Scan SSCC @ 425,​370,​520,​425]] 
 +  * [[implementation:​wms:​directcyclec#​enter_batch_data1|Enter batch data @ 425,​465,​520,​520]] 
 +  * [[implementation:​wms:​directcyclec#​add_quantity1|Add quantity @ 425,​560,​520,​615]] 
 +{{<map}}
  
 Select the “Direct cycle counting” function on the handheld terminal. Select the “Direct cycle counting” function on the handheld terminal.
Line 11: Line 29:
   * Count items on location: count only a certain product on the location.   * Count items on location: count only a certain product on the location.
  
-==== 10.2.1. Count location==== +===== 10.2.1. Count location===== 
-**Identify location** \\+===Identify location===
 Identify the location for which cycle counting has to be done.  Identify the location for which cycle counting has to be done. 
  
 {{ :​implementation:​functionalguide:​cycle_count:​dcc_location.png |}} {{ :​implementation:​functionalguide:​cycle_count:​dcc_location.png |}}
     ​     ​
-**Scan SSCC** \\+===Scan SSCC===
 Identify the logistic unit on which the item is stored or to select “No SSCC” in case the item is not stored on an existing logistic unit. Identify the logistic unit on which the item is stored or to select “No SSCC” in case the item is not stored on an existing logistic unit.
  
-**Stop process** \\+===Stop process===
 To stop the process, press the ‘Stop’ button. After pressing the button, the system will ask for confirmation. To stop the process, press the ‘Stop’ button. After pressing the button, the system will ask for confirmation.
   * Press ‘No’ to proceed with the cycle count.   * Press ‘No’ to proceed with the cycle count.
   * Press ‘Yes’ to finish the cycle count. After pressing ‘Yes’, the differences will be shown if configured. If no item was counted during the cycle count, the location will be booked as an empty location.   * Press ‘Yes’ to finish the cycle count. After pressing ‘Yes’, the differences will be shown if configured. If no item was counted during the cycle count, the location will be booked as an empty location.
  
-**Identify product** \\+===Identify product===
 Scan or select an item. It is possible to scan the GTIN on the product or the GS1/EAN128 barcode on the logistic unit (in case of a mono pallet). Scan or select an item. It is possible to scan the GTIN on the product or the GS1/EAN128 barcode on the logistic unit (in case of a mono pallet).
 When selecting a product manually, the complete item list will open, as it is always possible that any item which has not been registered administratively at that location, may be present there. When selecting a product manually, the complete item list will open, as it is always possible that any item which has not been registered administratively at that location, may be present there.
Line 31: Line 49:
 {{ :​implementation:​functionalguide:​cycle_count:​dcc_batch.png |}} {{ :​implementation:​functionalguide:​cycle_count:​dcc_batch.png |}}
     ​     ​
-**Enter batch data** \\+===Enter batch data===
 If there is no GS1/EAN128 product barcode on the logistic unit, the system will ask to enter additional information about the product manually, e.g. the batch number, second batch number, and/or the best before date. If there is a GS1/EAN128 barcode on the logistic unit, the system would have recorded this information directly. ​ If there is no GS1/EAN128 product barcode on the logistic unit, the system will ask to enter additional information about the product manually, e.g. the batch number, second batch number, and/or the best before date. If there is a GS1/EAN128 barcode on the logistic unit, the system would have recorded this information directly. ​
  
-**Add quantity** \\+===Add quantity===
 Enter the quantity. Enter the quantity.
  
 {{ :​implementation:​functionalguide:​cycle_count:​dcc_end.png |}} {{ :​implementation:​functionalguide:​cycle_count:​dcc_end.png |}}
    
-**Add new item or finish process** \\+===Add new item or finish process===
 After the confirmation of the quantity, the system asks whether to count an additional item at that location. After the confirmation of the quantity, the system asks whether to count an additional item at that location.
 When pressing ‘Yes’, the counting process will proceed with a new item. When pressing ‘Yes’, the counting process will proceed with a new item.
Line 57: Line 75:
 Press the right arrow button to confirm the differences. After that, the system books positive differences as “Goods Receipt” and negative differences as “Goods Issue”. The pricelist defined on the Cycle count controller is used on these documents. Press the right arrow button to confirm the differences. After that, the system books positive differences as “Goods Receipt” and negative differences as “Goods Issue”. The pricelist defined on the Cycle count controller is used on these documents.
  
-**Cancel cycle count** \\+===Cancel cycle count===
 To cancel the process, press the left arrow button. The system will check whether there are already entered stock. If there are, the system will ask for confirmation. To cancel the process, press the left arrow button. The system will check whether there are already entered stock. If there are, the system will ask for confirmation.
   * When clicking ‘Yes’, the list of counted stock will be cleared, and no bookings will be done. This can be considered a ‘cancellation’ of the counted stock.   * When clicking ‘Yes’, the list of counted stock will be cleared, and no bookings will be done. This can be considered a ‘cancellation’ of the counted stock.
Line 64: Line 82:
 {{ :​implementation:​functionalguide:​cycle_count:​dcc_cancel.png?​220 |}} {{ :​implementation:​functionalguide:​cycle_count:​dcc_cancel.png?​220 |}}
  
-==== 10.2.2. Adjust logistic unit==== +===== 10.2.2. Adjust logistic unit===== 
-**Scan SSCC** \\+===Scan SSCC===
 Identify the SSCC. After identifying the SSCC, the system will display all the items stored on the SSCC.  Identify the SSCC. After identifying the SSCC, the system will display all the items stored on the SSCC. 
  
 {{ :​implementation:​functionalguide:​cycle_count:​dcc_adjust_lu.png |}} {{ :​implementation:​functionalguide:​cycle_count:​dcc_adjust_lu.png |}}
       ​       ​
-**Select item** \\+===Select item===
 Select an item from the list. Select an item from the list.
  
-**Adjust quantity** \\+===Adjust quantity===
 Adjust the quantity of the selected item.  Adjust the quantity of the selected item. 
 If the quantity in stock matches with the quantity in the inventory, the system goes back to the list of the items on the SSCC. If the quantity in stock matches with the quantity in the inventory, the system goes back to the list of the items on the SSCC.
 If the quantity in stock does not match with the quantity in the inventory, the system updates the quantity in the inventory. After the system update, the counting can be continued on another SSCC. If the quantity in stock does not match with the quantity in the inventory, the system updates the quantity in the inventory. After the system update, the counting can be continued on another SSCC.
  
-==== 10.2.3. Count items on location====  +===== 10.2.3. Count items on location===== 
-**Identify location** \\+===Identify location===
 Identify the location for which cycle counting has to be done.  Identify the location for which cycle counting has to be done. 
            
-**Identify product** \\ +===Identify product=== 
-Select the item to count on the location. ​For the steps see: Count locationIdentify ​product+Select the item to count on the location. ​It is possible to scan the GTIN on the product or the GS1/EAN128 barcode on the logistic unit (in case of a mono pallet). 
 +When selecting a product ​manually, the complete item list will open, as it is always possible that any item which has not been registered administratively at that location, may be present there.
  
 {{ :​implementation:​functionalguide:​cycle_count:​dcc_emptyloc.png |}} {{ :​implementation:​functionalguide:​cycle_count:​dcc_emptyloc.png |}}
  
-**Empty location** \\+==Empty location==
 If the location is empty, press on the ‘Location is empty’ button. After pressing the button, the system will ask for confirmation whether the location is empty or not. When pressing the ‘Yes’ button, the system books this location as an empty location and the counting can be continued on another location. If the location is empty, press on the ‘Location is empty’ button. After pressing the button, the system will ask for confirmation whether the location is empty or not. When pressing the ‘Yes’ button, the system books this location as an empty location and the counting can be continued on another location.
 Scan an SSCC. If there is no SSCC present, press the ‘No SSCC’ button. Scan an SSCC. If there is no SSCC present, press the ‘No SSCC’ button.
Line 93: Line 112:
 {{ :​implementation:​functionalguide:​cycle_count:​dcc_quantity.png |}} {{ :​implementation:​functionalguide:​cycle_count:​dcc_quantity.png |}}
       ​       ​
-**Enter batch data** \\ +===Enter batch data=== 
-See: //Count location/ Enter batch data//+If there is no GS1/EAN128 product barcode on the logistic unit, the system will ask to enter additional information about the product manually, e.g. the batch number, second batch number, and/or the best before date. If there is a GS1/EAN128 barcode on the logistic unit, the system would have recorded this information directly. ​
  
-**Adjust quantity** \\+===Adjust quantity===
 Enter the quantity. ​ Enter the quantity. ​
  
-**Add new item or finish process** \\ +===Add new item or finish process=== 
-See: //​Count ​location/ Add new item or finish process//+After the confirmation of the quantity, the system asks whether to count an additional item at that location
 +When pressing ‘Yes’, the counting process will proceed with a new item
 +When pressing ‘No’, the system calculates if there is a difference between the quantity of items counted on the location and the registered quantity in the inventory report.
  
-**Cancel cycle count** \\ +{{ :​implementation:​functionalguide:​cycle_count:​dcc_leave.png |}} 
-See: //Count location/ Cancel ​cycle count//+       
 +When there is no difference, the system will display an empty ‘Difference stock’ screen. 
 + 
 +When there is a difference, the following will be shown on the screen: 
 +  ​In the case the difference is positive, the handheld will show a blue arrow pointing upward. (Items with differing batch data will be counted as a new item as well.) 
 +  ​In the case the counted item is new for this location, the handheld will show a green arrow pointing upwards to the right. 
 +  * In the case the difference is negative (i.e. less stock at the location than registered in inventory), the handheld will show a red arrow pointing downwards to the right and add a minus sign before the quantity. 
 + 
 +{{ :​implementation:​functionalguide:​cycle_count:​dcc_difference.png |}} 
 +     
 +Press the right arrow button to confirm the differences. After that, the system books positive differences as “Goods Receipt” and negative differences as “Goods Issue”. The pricelist defined on the Cycle count controller is used on these documents. 
 + 
 +===Cancel cycle count=== 
 +To cancel the process, press the left arrow button. The system will check whether there are already entered stock. If there are, the system will ask for confirmation. 
 +  ​When clicking ‘Yes’, the list of counted stock will be cleared, and no bookings will be done. This can be considered a ‘cancellation’ of the counted stock. 
 +  * When clicking ‘No’ the cycle count process can be continued. 
 + 
 +{{ :​implementation:​functionalguide:​cycle_count:​dcc_cancel.png?​220 |}}
implementation/wms/directcyclec.txt · Last modified: 2018/06/29 12:58 by csuhaa