This screen provides an overview of the running production orders and the inventory in the available lined up locations.

Production line
This is the name of the production line. Only active production lines are listed.
When the ‘Only 1 started production order allowed’ option is not flagged for the Production line, it is possible to start more than one production order on the line. Every started production order is displayed in a separate row.

Production order number
This is the number of the production order. Production orders with ‘Started’ status assigned to the production line are displayed.

Item code
The code of the item to produce.

Description
The description of the item to produce.

#done
The quantity that is already produced.

#to do
The quantity that still has to be produced. It is calculated by: {Planned quantity – Done quantity}.

#planned
The planned quantity in the production order.

Status
The status of the production line. The status can be ‘Started’, if there is a started production on the line or ‘Free’, if there is no started production on the line.

Tank
The name of the silo/ tank. Every lined up silo/ tank location is listed.

Item code
The code of the item stored in the silo/tank.

Description
The description of the item stored in the silo/tank.

Batch
The batch number of the item stored in the silo/tank.

# in tank
The available quantity of the item in the tank.

Production line
The code of the production line where the silo/tank is in use.

Press the ‘Refresh’ button to refresh the screen.
Press the ‘Close’ button to close the screen.
Press the ‘Detail’ button to open the ‘Production detail’ window for the selected production order.
Press the ‘production orders’ button to open the ‘Production order’ window.

On this screen production orders can be released and started.

Select the production line from the dropdown menu.
Production orders without an assigned production line and production orders that are assigned to the selected production line are listed on the screen.

Production n°
The number of the production order.

Date
The due date of the production.

Item code
The code of the item to produce.

Description
The description of the item to produce.

Quantity
The planned quantity in the production order.

Status
The Produmex status of the production order. Possible values: Planned, On hold, Released, Started.

Production line
The assigned production line of the order.
When the production order has no assigned production line, this field is empty. When the selected production line is assigned to the production order, the value is the code of the production line. Production orders assigned to another production line are not displayed on the list.

Press the ‘Release order’ button to release the production order. Only ‘Planned’ production orders can be released.
Press the ‘Start production order’ button to open the Start production screen. Only ‘Released’ production orders can be started.
Press the ‘Production line details’ button to open the Production detail screen. The button is only active if the status of the selected production order is ‘Started’.
Press the ‘Close’ button to close the screen and go back to the Production zone screen.

On this screen the production order can be started. It is also possible to assign the lined up location for lined up components and to modify the batch number and best before date, depending on the item details and the production settings.

Production order
The number of the production order.

Item
The code and description of the item to produce.

Quantity to make
The planned quantity in the production order.

Batch number
Batch number of the product to produce. This field is only displayed when the item has batch numbers.

Batch number 2
Batch number of the product to produce. This field is only displayed when the item has second batch numbers.
Adjust the batch number settings on the 5.1.3.4. Batchnumber production company.

Best before date
Best before date of the product to produce. This field is only displayed if the item has a best before date. Adjust the best before date settings in the 3.2.3.29. Expiry definition UDT and the 5.1.3.6. Best before for production generator.

Item code
The item code of the component that has to be lined up.

Description
The item description of the component that has to be lined up.

Tank
The tank assigned to the component.

Tank
List of lined up locations added to the production line. For more information about the production line settings see: 5.2.3. Production line settings.

#in tank
The available quantity of the selected item in the tank.

Produce?
Displays whether the ‘Produce ingredients’ option is enabled or not for the lined up location on the production line. For more information about the settings for the added lined up locations see: 5.2.3. Production line settings.

To assign a tank for the selected component, select a tank and press the ‘Assign tank’ button.
Press the ‘Start production’ button to start the production.
Press the ‘Close’ button to close the screen and go back to the Production order screen.

On this screen the production can be finished. Produced and theoretical consumed quantities are displayed.

See: start production

Quantity made
The produced quantity.

Quantity still to make
The quantity that still has to be produced.

Item code
The item code of the component. Every not lined up component from the production order are listed here.

Description
The item description of the component.

#to pick
The quantity that still needs to be picked.

#on input
The available quantity of the component on the input location of the production line.

#on line
The available quantity of the component on the production line.

#used
The consumed quantity.

Item code
The item code of the component that has to be lined up. Every lined up component from the production order is listed here.

Description
The item description of the component.

#still needed
The quantity that still has to be consumed for the production.

#used
The consumed quantity.

#in tank
The available quantity of the component in the tank.

Tank
The lined up location assigned for the component. It is possible to change the tank: press the ‘Change tank’ button.

Tank
List of lined up locations added to the production line. For more information about the production line settings see: 5.2.3. Production line settings.

#in tank
The stock of the selected item available on the lined up location.

Press the ‘Refresh’ button the refresh the screen.
Press the ‘Finish production’ to open the Stop production screen.
Press the ‘Close’ button to close the screen and go back to the Production order screen.

On this screen the material consumption can be confirmed and the production order(s) can be closed.

When finishing a production order linked to a production line where the SPL_CONS_LOCK option is set as the production manager type, the following screen opens:
On this screen only one production order can be closed.

See: start production

Item code
The item code of the component that has to be lined up. Every component from the production order that has to be lined up is listed here. Different batches are displayed in separate lines.

Description
The item description of the component.

Batch 1- Batch 2 – BBD – SSCC
The batch details of the component in analogical order.

#on line
The available quantity of the item on the production line.

#used
The consumed quantity.

weight used
The consumed weight. (In case of catch weight items.)

#remaining
The quantity remaining on the production line. It is calculated from the #on line and the #used quantity.

weight remaining
The weight remaining on the production line.

Serial numbers
Click on this field to add the serial numbers of the used products.

Item code
The item code of the component that has to be lined up. Every component from the production order that has to be lined up is listed here.
If the ‘Direct consumption of goods’ option is flagged for the silo/tank, the products stored on that location will not be displayed.

Description
The item description of the component.

#used
The consumed quantity.

weight used
The consumed weight.

#remaining
The quantity remaining in the lined up location.

Tank
The lined up location assigned to the component.

Press the ‘Stop’ production screen to close the production order.
Press the ‘Close’ button to close the screen and go back to the Production detail screen.

When finishing a production order linked to a production line where the MPL_CONS_INPUT option is set as the production manager type, the following screen opens:
On this screen multiple production orders assigned to different production lines can be closed.

Production line
The code of the production line. A production line is listed if:

• has the same input location
• there is a started production order

Production order number
This is the number of the production order. Production orders with ‘Started’ status assigned to the production line are displayed.

Item code
The code of the item to produce.

# done
The quantity that is already produced.

# planned
The planned quantity in the production order.

Item code
The item code of the component. Every not lined up component from the selected production order are listed here.

Description
The item description of the component.

#theoretical
The theoretical quantity is calculated by: {Produced quantity*Base quantity of the component}.

#used
The used quantity is calculated by: {(component’s theoretical quantity for the production order/ ? theoretical quantity of the component)*quantity on the input location}.

EXAMPLE:

Production line A
Produced quantity: 1

Production line B
Produced quantity: 2

Weight used
The consumed weight.

Item code The item code of the component that has to be lined up. Each lined up component from the listed production orders are listed. Different batches are displayed in separate lines. If the ‘Direct consumption of goods’ option is flagged for the silo/tank, the products stored on that location will not be displayed.

Description
The item description of the component.

#theoretical
The theoretical quantity is calculated by: {Produced quantity*Base quantity of the component}.

# used
The consumed quantity.

Weight used
The consumed weight.

# remaining
The quantity remaining in the lined up location.

Location
The lined up location assigned to the component.

Press the ‘Stop production’ button to close every listed production order.
Press the ‘Close’ button to close the screen and go back to the Production detail screen.