With the Zone Box Picking Flow on the Mobile Client, it is possible to select specific zones in the warehouse and perform the picking process directly into boxes on a cart. For information on configuring zones and zone types see Working with Zones and Zone Types.

The flow is based on a single picklist or a wave containing picklists for multiple customers.

If a full SSCC is picked, the system keeps the existing SSCC number, otherwise the system generates an SSCC number when the first item is picked.

The process always requires the use of a movable location. When the picking process is completed for the wave, the Unload Movable Locations to Dock Flow can be started on the Mobile Client to unload the movable locations to the dock.

Important: The Zone Box Picking Flow is a new framework. When upgrading to product version 2020.09, the system creates a copy on the Extension Parameters and applies the settings to the Zone Box Picking Flow. Then the Zone Box Picking Flow can be configured only in the database, that is, if any Extension Parameter is changed in SAP Business One later on, the change does not affect the Zone Box Picking Flow.

Exceptions: The following settings have a fixed value. If they are changed in the database, the change does not have any effect.

Zone Picking settings: By default, the following settings are disabled on the picklist controller.

• Lock wave by zone/user
• Only show completely unlocked waves in case of zone picking

Produmex Picklist types
It is important to enable the correct setting in Produmex Picklist types table for the workflow to properly work. Enable the “Use for Zone Picking” setting matched to the picklist type!

Open the following menu to set the setting:
Tools > Default Forms > PMX_PLTY Produmex Picklist tyes

On the Mobile Client select Sales > Zone Box Picking.

Continue with section 2. Select a wave.

The Select Wave screen lists the waves in which the picklists have the status of Not ready, Ready and Partially picked.

Select a wave from the list and tap the right arrow button. The system makes the picklist ready and it defines which zones you can select on the Select a Zone screen.

Continue with section 3. Select a zone.

The Select a Zone screen lists the zones in which the selected item can be picked. Select a zone and tap the right arrow button.

Continue with section 4. Select an item to pick

On the Items Still to Pick screen select an item from the list and tap the right arrow button.

• If you are picking a full pallet, continue with section 5. Scan a source SSCC.
• If the item is stored on a location, continue with section 6. Identify pick location.

On the Scan an SSCC screen scan a source SSCC and the system keeps the SSCC number.

• If you are performing the first picking process for the customer in the wave, continue with section 12. Identify a movable location.
• If this is not the first picking process performed for the customer in the wave, continue with section 13. Items are picked.

If you must select another movable location or alternate stock or you must skip the item, tap the Other tasks button and continue with section 7. Other tasks.

On the Identify Pick Location screen you have the following options:

Scan a location and continue with section 8. Scan a product.

Select a location from a list as follows.

1. Tap the Select Location button.
2. On the Select a Location screen select the necessary location from the list.
3. Tap the right arrow button and continue with section 8. Scan a product.

If you must select another movable location or alternate stock or you must skip the item, tap the Other tasks button and continue with section 7. Other tasks.

When you tap the Other Tasks button, you can select another movable location, select alternate stock or skip the item.

Select another movable location

The Other Mov. Loc. button is displayed on the Select a Task screen if a movable location has already been identified while performing the picking process for the selected wave.

If you have already identified a movable location, the system automatically uses this movable location when picking the second item. If the picking process must be continued on a different movable location, proceed as follows.

1. On the Select a Task screen tap the Other Mov. Loc. button.
2. On the Identify Movable Location screen scan a movable location or tap the Select Movable Location button.
3. If you have tapped the Select Movable Location button, select a movable location from the list and tap the right arrow button.

If you use more than one movable location and start the picking process again, the system asks you on which movable location you want to continue the picking.

Select alternate stock:

1. On the Select a Task screen tap the Alternate Stock button.
2. On the Select Alternate Stock screen select the stock.
3. Tap the right arrow button.

If any of the following settings are enabled on the picklist controller, it is possible to pick items as alternate stock from bulk locations.

• Allow alternate stock to pick from bulk locations?
• Can the user pick bulk quantity from bulk location?
• Can the user pick full pallet from bulk location?

Note: The alternate stock has to be free stock.

Skip the item:

On the Select a Task screen tap the Skip Item button.

If there are no more items in the picklist, the system displays the message There is no more item to pick. Tap OK and the flow goes to step 2. Select a Wave.

On the Scan a Product screen scan a product or select a product from a list.

To select a product from a list, proceed as follows.

1. Tap the Select a Product button.
2. Select a product from the list.
3. Tap the right arrow button.

Continue with section 9. Enter the quantity.

On the Enter the Quantity screen enter the quantity of the item to pick and tap the right arrow button.

For more information about the quantity adding screens see Screens for entering additional information.

• If you are performing the first picking process for the customer in the wave, continue with section 10. Select a logistic carrier.
• If this is not the first picking process performed for the customer in the wave, continue with section 11. Identify the destination SSCC.

On the Select a Logistic carrier screen select a logistic carrier from a list and tap the right arrow button to proceed with the flow.

If no logistic carrier is used, tap the No Logistic Carrier button.

If the 203 - Picking: Prepare cart: New SSCC created print event is set for the picklist type, the print event is triggered when a new SSCC is created.

Continue with section 12. Identify a movable location.

If an SSCC has already been created for the customer while performing the picking process in the wave, the system displays the Identify SSCC to Confirm screen and you have the following options:

• Scan the destination SSCC.
  • The screen lists only open SSCCs, but a closed SSCC can be scanned as well if it has not been unloaded yet. In this case the system asks if you want to reopen the SSCC.
  • If the identified destination SSCC is on a movable location different from the movable location that has been selected in the flow before, the system will use this movable location as the currently selected movable location. A different movable location can be selected on the Other Tasks screen.
  • Continue with section 13. Items are picked.

• To create a new SSCC, tap the New SSCC button and continue with section 10. Select a logistic carrier.

• To close the SSCC manually, tap the Close SSCC button.
  • The status of the SSCC is set to Is ready for packing.
  • If the 200 - Picking: New LU full print event is set for the picklist type, the print event is triggered when the SSCC is closed.

On the Identify Movable Location screen scan a movable location or select one from a list.

To select a movable location from a list, proceed as follows.

1. Tap the Select Movable Location button.
2. On the Select a Movable Location screen select a movable location from the list.
3. Tap the right arrow button to proceed with the flow.

Continue with section 13. Items are picked.

The system displays the message The items are picked. Tap OK.

• The status of the picklist line is Picked. If there is another item in the picklist to be picked, the status of the picklist is Partially picked and the system goes to step 4. Select an item to pick.

• If the status of all the picklist lines in the picklist is Picked, the status of the picklist is Picked.

• When the picking process is completed for the zone, the system informs you that there is no more item to pick in the selected zone. The system closes all the SSCCs that have not been closed manually in the wave.
  • The status of all closed SSCCs is Is ready for packing and the status of all finished picklists is Picked. The flow goes to step 2. Select a Wave.
  • If the 200 - Picking: New LU full print event is set for the picklist type, the print event is triggered when the SSCCs are closed.

When the picking process is completed, the Unload Movable Locations to Dock Flow allows for selecting the wave and the process of unloading the movable locations to the dock can be started. The Unload Movable Locations to Dock Flow supports fully picked waves and partially picked waves if the status of the picklist is Picked and the SSCC is closed.