===2.3.3. Barcode Controller===

(1) __Extension: B10 Automotive Barcode__
 
It captures barcodes according to B10 standards.

If the scanned value does not seem to be a B10 barcode, the scanned value is parsed through the GS1 barcode controller. \\
To be able to know the difference between a scanned barcode and manual entry, the barcode needs to be in Code39 format. This means that the barcode needs to start with ]A0 \\

Note: The location barcodes cannot be in format Code39, otherwise locations that for instance start with Q, P, ... would be considered a value for the B10.

Q: Quantity - Stored in field for AI(37) Count (=int) \\
P: Part number - This is the item code \\
S: Serial number - Will be stored as SSCC \\
V: Supplier code

{{ :implementation:wms:ose:extensions:barcode_controller_01.png |Barcode Controller}}

(2) __Extension: GS1 Barcode__

It captures barcodes according to GS1 standards.

{{ :implementation:wms:ose:extensions:barcode_controller_02.png |Barcode Controller}}

**//Set AI(17) as AI(15) (Y/N)//** \\
If enabled, then when scanning a barcode containing an AI17 value, the AI17 value will be added as the best before date (AI 15).