The Receive from WHS Flow is used to move stock from a warehouse that is not managed by Produmex to a warehouse that is managed by Produmex.

When moving the stock between warehouses the use of the Inventory Transfer Request document is optional.

The flow uses a transit warehouse not managed by Produmex as the source warehouse.

1. Adjust the settings of the source warehouse on the User Defined Fields of the Warehouses-Setup screen.

2. Create the warehouse in the Organizational Structure.

3. Create at least one dock within the warehouse.

4. Enabled the warehouse for the scanner on the Warehouses tab of the Thin Client element of the Organizational Structure.

5. Set the Put away for receive from warehouse generator. It generates put away move orders when finishing the Receive from WHS Flow.

There are two options to start the flow on the Mobile Client.

(1) Logistics > Move > Receive from WHS

(2) Purchase > Receive from WHS

On the Select a location screen select the receiving dock from the list of the available locations or enter the code of the dock. Press the right arrow key to proceed.

On the Select an order screen select the inventory transfer request from the list of the orders or enter the number of the inventory transfer request. Press the right arrow key to proceed with scanning a barcode.

If you want to continue the flow without selecting an Inventory Transfer Request, tap the No Order button.

If you tap the No Order button, the system displays the Select a source warehouse screen.

Scan the barcode(s) on the logistic unit and tap the Done button.

All the information from the GS1 barcodes is saved into the memory and the system does not ask additional questions about the scanned information.

If there is no label on the logistic unit, tap the No label on the logistic unit button.

If there is no SSCC barcode among the scanned barcodes, or there is no label on the logistic unit, the system asks if there are identical logistic units.

If there are identical logistic units, tap button Identical logistic units button.

The system asks the quantity of the identical logistic units. Enter the number of the logistic units. The number of the logistic units is not limited. Tap the right arrow key to proceed.

If there is no identical logistic unit, tap the No identical logistic units button.

Scan the barcode or tap the Select a product button.

Select the product from the list.

If the batch number was not scanned previously, select it from the list. At this step, new batch numbers cannot be added to the system. Only batches available in the source warehouse can be selected.

Based on the item settings, additional data can be entered to the batch, e.g. Best Before Date, second batch number, batch attributes, etc.

Enter the item quantity or scan the serial numbers. The entered quantity cannot exceed the open quantity defined in the inventory transfer request.

When an item has a serial number, the system automatically offers the scanning option.

Based on the settings of the catch weight function, the system might ask for entering the weight as well.

After entering the quantity, the system prints the item label(s) depending on the item settings.

After entering the quantity, the system asks whether there are other products on the logistic unit that are not scanned.

If there are other products on the logistic unit, tap Yes. Go back to the Identify product step to identify the products on the logistic unit.

Tap the Receive items button to finish the process. When you tap the Receive items button, the system books the inventory transfer.

If there is no other product on the logistic unit, tap No and the system registers the item. The data of the registered items is stored in ASN tables.

As the data of the registered items is stored in the system, it is possible to continue the flow after it was stopped without booking the items.

If there was no SSCC barcode among the scanned barcodes, or there was no label on the logistic unit, the system generates an SSCC barcode. The system also triggers the Warehouse: a new LU has been created (700) print event and prints the logistic label. The default report for this print event is the DefaultLogisticsLabel.rpt.

If the Move all items in 1 stock transfer? option is disabled on the Receive from WHS controller, the Inventory Transfer document is created and the system returns to the Select an inventory transfer request screen.

If the option is enabled, the system goes back to the Scan the GS1 barcode screen. On this screen an additional Receive items button is displayed. The Inventory Transfer document is created after you tap the Receive items button.

To continue the flow on a next logistic unit go back to the Scan the GS1 barcode(s) step. Tap the Receive items button to finish the process.

When you tap the Receive items button, the system books the inventory transfer. The system also triggers the Warehouse: move has been added (701) print event and prints the delivery document.

After booking the items, the system goes back to the Select an order screen, and the flow can be continued with another inventory transfer request.

Put away generation

Based on the Put away for receive from warehouse generator setting, the system checks if put away move order needs to be generated.

• Do not generate: The system does not generate put away move orders when finishing the Receive from WHS Flow.
• Generate: The system generates put away move orders when finishing the Receive from WHS Flow. The generated logistic unit can be selected during the Put Away Flow.
• Generate full pallet: The system generates put away move orders when finishing the Receive from WHS Flow. The generated logistic unit is a full pallet and it can be selected during the Put Away Flow.

When quitting after the item registration, the system offers the option to book receipt. Despite not booking the receipt, the flow can be continued after the registration step, because the system stores the data of the registered items in ASN tables.

If there are registered items in the system that were not booked, after the Select an inventory transfer request step the system asks whether you want to remove the registered items.

When you tap the Remove registered items button, the system removes the registered items and the flow continues with the Scan the GS1 barcode(s) step. When tapping the right arrow key, the flow proceeds with the registered items.