User Tools

Site Tools


implementation:wms:disassemblyweigh

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
implementation:wms:disassemblyweigh [2017/06/13 10:32]
csuhaa
implementation:wms:disassemblyweigh [2018/03/12 13:15] (current)
csuhaa 18.1
Line 19: Line 19:
  
 ==== 8.4.8. Disassemble ==== ==== 8.4.8. Disassemble ====
-After adding the products, press the ‘Disassemble’ button. On the next screen identify the destination logistic unit. See: [[implementation:​wms:​productionreceipt#​identify_the_sscc|8.1.4. Identify the SSCC]] ​\\ +After adding the products, press the ‘Disassemble’ button. On the next screen identify the destination logistic unit. See: [[implementation:​wms:​productionreceipt#​identify_the_sscc|8.1.4. Identify the SSCC]] ​ 
-Weigh a component or enter the quantity manually. Then press the button of the component to add the weighted quantity to the system. After the quantity has been added, the system books a ‘Receipt from production’ document and moves the component to the output location. ​\\ + 
-When added quantity exceeds the maximum quantity, the system displays an error message. The maximum quantity is calculated from the base quantity and the quantity tolerance of the component and the available quantity of the product on the line. \\ +Weigh a component or enter the quantity manually. Then press the button of the component to add the weighted quantity to the system. ​ 
-Proceed with the next component. After every component has been weighted, press the right arrow button to continue with the flow. \\ + 
-Press the ‘Logistic carrier is full’ button to continue the disassembly onto another logistic carrier. After the button has been pressed, the //​‘Production:​ logistic unit produced event (400)’// print event is triggered and the production label is printed. The default report for the print event is //​DefaultProductionLabel.rpt//​. ​ On the next screen identify the new destination logistic unit. \\+  * If the component is managed by batches, depending on the [[implementation:​wms:​productionconfig|batch number settings]] for production the system might ask to enter the batch number.  
 +  * If the component has a best before date, depending on the [[implementation:​wms:​productionconfig|best before date settings]] for production, the system might ask to enter the best before date. 
 +  * If the component has batch attributes, the system asks for adding those attributes too. 
 + 
 +After the quantity has been added, the system books a ‘Receipt from production’ document and moves the component to the output location. ​ 
 + 
 +When added quantity exceeds the maximum quantity, the system displays an error message. The maximum quantity is calculated from the base quantity and the quantity tolerance of the component and the available quantity of the product on the line.  
 + 
 +Proceed with the next component. After every component has been weighted, press the right arrow button to continue with the flow.  
 + 
 +Press the ‘Logistic carrier is full’ button to continue the disassembly onto another logistic carrier. After the button has been pressed, the //​‘Production:​ logistic unit produced event (400)’// print event is triggered and the production label is printed. The default report for the print event is //​DefaultProductionLabel.rpt//​. ​ On the next screen identify the new destination logistic unit. 
 To go back to the disassembly cockpit, press the left arrow button. . After the button has been pressed, the //​‘Production:​ logistic unit produced event (400)’// print event is triggered and the production label is printed. The default report for the print event is //​DefaultProductionLabel.rpt//​. To go back to the disassembly cockpit, press the left arrow button. . After the button has been pressed, the //​‘Production:​ logistic unit produced event (400)’// print event is triggered and the production label is printed. The default report for the print event is //​DefaultProductionLabel.rpt//​.
  
implementation/wms/disassemblyweigh.txt · Last modified: 2018/03/12 13:15 by csuhaa