User Tools

Site Tools


implementation:wms:cc_everything

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
implementation:wms:cc_everything [2017/10/09 10:58]
csuhaa
implementation:wms:cc_everything [2018/06/29 12:31] (current)
csuhaa 18.2
Line 1: Line 1:
 ===== 10.3.1.1. Count everything===== ===== 10.3.1.1. Count everything=====
-**Scan SSCC** \\+====Scan SSCC====
 Scan the SSCC or press the ‘No SSCC’ button if there is no SSCC present. Scan the SSCC or press the ‘No SSCC’ button if there is no SSCC present.
 +
 +To stop the process, press the ‘Stop’ button.
  
 **Empty location** \\ **Empty location** \\
-  * If the location is empty press the ‘Location is empty’ button. After pressing the button, the system will ask whether the location is empty. Press the ‘Yes’ button to confirm. Then the system will display the list of differences in stock if configured. When proceeding, the differences will be registered according to the type of cycle count (Lost and Found, Registration). +If the location is empty press the ‘Location is empty’ button. After pressing the button, the system will ask whether the location is empty. Press the ‘Yes’ button to confirm. Then the system will display the list of differences in stock if configured. When proceeding, the differences will be registered according to the type of cycle count (Lost and Found, Registration). 
-  * To stop the process, press the ‘Stop’ button.+
  
 {{ :​implementation:​functionalguide:​cycle_count:​cc_emptyloc.png |}} {{ :​implementation:​functionalguide:​cycle_count:​cc_emptyloc.png |}}
                
-**Scan item** \\+====Scan item====
 Scan the product barcode. When no barcode is present, press the ‘Select product’ button and select it from a list. This list contains all the products.  ​ Scan the product barcode. When no barcode is present, press the ‘Select product’ button and select it from a list. This list contains all the products.  ​
  
 {{ :​implementation:​functionalguide:​cycle_count:​cc_selectprod.png?​450 |}} {{ :​implementation:​functionalguide:​cycle_count:​cc_selectprod.png?​450 |}}
     ​     ​
-**Enter batch data** \\+====Enter batch data====
 If there is no GS1/EAN128 product barcode on the logistic unit, the system will ask to enter additional information about the product manually, e.g. the batch number, second batch number, and/or the best before date (if applicable). If there is a GS1/EAN128 barcode on the logistic unit, the system would have recorded this information directly. After the batch information has been entered, the system will check if the combination of batch/BBD is known in the system. If this is not the case, confirm that the batch/BBD is not known. If there is no GS1/EAN128 product barcode on the logistic unit, the system will ask to enter additional information about the product manually, e.g. the batch number, second batch number, and/or the best before date (if applicable). If there is a GS1/EAN128 barcode on the logistic unit, the system would have recorded this information directly. After the batch information has been entered, the system will check if the combination of batch/BBD is known in the system. If this is not the case, confirm that the batch/BBD is not known.
  
-**Add quantity** \\+====Add quantity====
 Enter the quantity. For more information about how to enter the quantity please see: [[implementation:​wms:​infoscreen|Screens for entering additional information]]. Enter the quantity. For more information about how to enter the quantity please see: [[implementation:​wms:​infoscreen|Screens for entering additional information]].
  
Line 30: Line 32:
 {{ :​implementation:​functionalguide:​cycle_count:​cc_serialnb.png?​450 |}} {{ :​implementation:​functionalguide:​cycle_count:​cc_serialnb.png?​450 |}}
  
-**Add new item or finish the process** \\    ​+====Add new item or finish the process====   
 After entering the quantity, proceed with the next item on the location. The system will display the ‘Cycle count: Scan an SSCC’ screen, however the ‘Location is empty’ button will not be displayed. After entering the quantity, proceed with the next item on the location. The system will display the ‘Cycle count: Scan an SSCC’ screen, however the ‘Location is empty’ button will not be displayed.
  
Line 40: Line 42:
   * Press ‘Yes’ to finish the cycle count. ​ After pressing the button, the differences will be shown if configured. When proceeding, the differences will be registered according to the type of cycle count (Lost and Found, Registration).   * Press ‘Yes’ to finish the cycle count. ​ After pressing the button, the differences will be shown if configured. When proceeding, the differences will be registered according to the type of cycle count (Lost and Found, Registration).
  
-**Cancel cycle count** \\+====Cancel cycle count====
 To cancel the process, press the left arrow button. The system will check whether there are already entered stock. If there are, the system will ask for confirmation. To cancel the process, press the left arrow button. The system will check whether there are already entered stock. If there are, the system will ask for confirmation.
   * When clicking ‘Yes’, the list of counted stock will be cleared, and no bookings will be done. This can be considered a ‘cancellation’ of the counted stock.   * When clicking ‘Yes’, the list of counted stock will be cleared, and no bookings will be done. This can be considered a ‘cancellation’ of the counted stock.
implementation/wms/cc_everything.txt · Last modified: 2018/06/29 12:31 by csuhaa